Animal Crossing Wild World 1.0 Lights Off/ Lights On

Good:

Code:

---

-Works indoors
-Works in all buildings
-Works on Wi-Fi (only you can see the changes)
-If you're lazy, this code works like a charm

---

Bad:

Code:

---

-It turned my roof from red to gray
-Cockroaches in my house
-Changed the time causing me to have lots of weeds
-House changed from Mansion to Level 1 House
-Inside is the default (when you first start the game for the 1st time)
-I can't change the inside back to the mansion level (inside)

---

So here's the working code before I decided to make it work outdoors (It works perfectly)

My First Attempt at it (Success, No Problems At All)

Turn Lights On/Off (Indoors)(R+Up/Down)

Code:

---

94000130 FEBF0000
221C99DC 00000001
D0000000 00000000
94000130 FE7F0000
221C99DC 00000000
D2000000 00000000

---

Here's the code after I tried to find the outside address =I:

WARNING: Please don't test unless you have a backup save.

Turn Lights On/Off (R+Up/Down)

Code:

---

94000130 FEBF0000
221C99DC 00000001
221E68CA CCCC0000 ;@What I thought Was The Outdoor Address
D0000000 00000000
94000130 FE7F0000
221C99DC 00000000
021E68CA CCCC0000 ;@Same
D2000000 00000000

---

Edit: Man, I was a noob. Tip: Never use a 32-bit write on a non-32-bit address, heh. Here's the working code.

Edit: Please delete this.

lol Pretty neat. Have you worked out all of the bugs yet?

Hmmm... I Just made a little better, easier to see video in No$. Take a look at THIS LINK. It does seem to have some side effects though.

I'll mess around with this sometime.
I'm guessing, since it changes all of that with just one write, you'll need to do this a different way.

I agree... The actual lights outside (dark vs light) seem to change about 40 different adresses...

Just took a look at the address for inside and see that it works exactly as Demonic thought... I'm trying to use the time modifier for the outside address, but we'll see :D

Yeah, I cant get it working outside without some kind of bad effect. I thought about since it changed my house back to a level 1 model would I need to set my house to a mansion then maybe it'll give a new address.

Well... whats the address you're using now for the outside one? (I don't care about the effects)

I keep finding a new address every time. Here's my new findings:

221E575C 000000BF <--I guess its supposed to turn on
221E575C 000000FF <----Off

Then I found:

221E68CA 00000000 <--on
221E68CA 00000004 <--off

None Worked though. The original one I first posted works, but has bad effects to it so I'm not sure. @~@

Edit: The last two addresses work fine. :P

I'm going to work on it tomorrow since I have school in the morning and homework. :|

Instead of attempting to find the online address, I found the addresses for v1.1.

Lights On/Off Anywhere [basically in any building except outside] Animal Crossing 1.1:

Turn Lights On/Off (R+Up/Down)

Code:

---

94000130 FEBF0000
221C9F5C 00000001
D0000000 00000000
94000130 FE7F0000
221C9F5C 00000000
D2000000 00000000

---

Now all 3 Versions (tested on an emulator except 1.0 [the game version that I have]):

Turn Lights On/Off (R+Up/Down)

1.0

Code:

---

94000130 FEBF0000
221C99DC 00000001
D0000000 00000000
94000130 FE7F0000
221C99DC 00000000
D2000000 00000000

---

1.1

Code:

---

94000130 FEBF0000
221C9F5C 00000001
D0000000 00000000
94000130 FE7F0000
221C9F5C 00000000
D2000000 00000000

---

EU

Code:

---

94000130 FEBF0000
221CD33C 00000001
D0000000 00000000
94000130 FE7F0000
221CD33C 00000000
D2000000 00000000

---

Same thing as before -- it doesn't work outdoors or online.

Sorry, I haven't worked on this or anything but was gonna play with it, and was wondering if there are still glitches with the code posted above? I don't wanna ruin anything :). Thanks.

Nope; the post with all the 3 Versions were tested on a ROM and I have 1.0 which I tested myself.